Antibodies

Biotinylated Polyclonal Antibodies

The exploitation of the high binding affinity of avidin for biotin is used in various analytical techniques, including direct ELISA, sandwich ELISA, microarray, and immunohistochemistry. PeproTech’s biotinylated antibodies are produced from highly pure and specific antigen affinity-purified polyclonal antibodies, and are therefore ideal for use in any analytical procedures that require biotinylated antibodies.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human AITRL

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hAITRL. Anti-Human AITRL specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human AITRL (PeproTech catalog# 310-22)

Sandwich ELISA: To detect hAITRL by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human AITRL (500-P244) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hAITRL.

Biotinylated Anti-Human AITRL Sandwich ELISA

Western Blot: To detect hAITRL by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hAITRL is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human AITRL Western Blot Unreduced Biotinylated Anti-Human AITRL Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

New
Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human Amphiregulin

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits immunized with highly pure Recombinant Human Amphiregulin. Anti-Human Amphiregulin-specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human Amphiregulin (PeproTech catalog# 100-55B)

Sandwich ELISA: To detect Human Amphiregulin by sandwich ELISA (using 100μl/well), a concentration of 0.25-1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human Amphiregulin (500-P322) as a capture antibody, allows the detection of at least 2000-4000 pg/ml ofRecombinant Human Amphiregulin.

Biotinylated Anti-Human Amphiregulin Sandwich ELISA

Western Blot: To detect Human Amphiregulin by Western Blot analysis, this antibody can be used at a concentration of 0.1-0.2 μg/ml. When used in conjunction with compatible development reagents, the detection limit for Recombinant Human Amphiregulin is 1.5-3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human Amphiregulin Western Blot Unreduced Biotinylated Anti-Human Amphiregulin Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human ApoE3

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hApoE3. Anti-Human ApoE3 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human ApoE3 (PeproTech catalog# 350-02)

Sandwich ELISA: To detect hApoE3 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human ApoE3 (500-P238) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hApoE3.

Biotinylated Anti-Human ApoE3 Sandwich ELISA

Western Blot: To detect hApoE3 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hApoE3 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human ApoE3 Western Blot Unreduced Biotinylated Anti-Human ApoE3 Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human APRIL

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hAPRIL. Anti-Human APRIL specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: Insect cells derived Recombinant Human APRIL (PeproTech catalog# 310-10)*
*Catalog# 310-10 has been replaced with 310-10C.

Sandwich ELISA: To detect hAPRIL by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human APRIL (500-P192) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hAPRIL.

Biotinylated Anti-Human APRIL Sandwich ELISA

Western Blot: To detect hAPRIL by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hAPRIL is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human Artemin

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hArtemin. Anti-Human Artemin specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human Artemin (PeproTech catalog# 450-17)

Sandwich ELISA: To detect hArtemin by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human Artemin (500-P245) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hArtemin.

Biotinylated Anti-Human Artemin Sandwich ELISA

Western Blot: To detect hArtemin by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hArtemin is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human Artemin Western Blot Unreduced Biotinylated Anti-Human Artemin Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human 4-1BB Ligand

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant h4-1BBL (human 4-1BBLigand). Anti-Human 4-1BBL specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human 4-1BB Ligand (PeproTech catalog# 310-11)

Sandwich ELISA: To detect h4-1BBL by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human 4-1BBL (500-P169) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant h4-1BBL.

Biotinylated Anti-Human 4-1BB Ligand Sandwich ELISA

Western Blot: To detect h4-1BBL by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 μg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant h4-1BBL is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human 4-1BB Receptor

Source: Polyclonal Goat

Preparation: Produced from sera of goats pre-immunized with highly pure (>98%) recombinant h4-1BB Receptor. Anti-Human 4-1BB Receptor specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human 4-1BB Receptor (PeproTech catalog# 310-15)

Sandwich ELISA: To detect h4-1BB Receptor by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human 4-1BB Receptor (500-P167G) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant h4-1BB Receptor.

Biotinylated Anti-Human 4-1BB Receptor Sandwich ELISA

Western Blot: To detect h4-1BB Receptor by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant h4-1BB Receptor is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human 4-1BB Receptor Western Blot Reduced Biotinylated Anti-Human 4-1BB Receptor Western Blot Unreduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Murine B7-1

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant mB7-1. Anti-Murine B7-1 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Murine B7-1

Sandwich ELISA: To detect mB7-1 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Murine B7-1 (500-P128) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant mB7-1.

Western Blot: To detect mB7-1 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant mB7-1 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BAFF

Source: Polyclonal Goat

Preparation: Produced from sera of goats pre-immunized with highly pure (>98%) recombinant hBAFF. Anti-Human BAFF specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BAFF (PeproTech catalog# 310-13)

Sandwich ELISA: To detect hBAFF by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BAFF (500-P163G) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBAFF.

Biotinylated Anti-Human BAFF Sandwich ELISA

Western Blot: To detect hBAFF by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBAFF is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BAFF Western Blot Unreduced Biotinylated Anti-Human BAFF Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BCA-1 (CXCL13)

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBCA-1. Anti-Human BCA-1 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BCA-1 (CXCL13) (PeproTech catalog# 300-47)

Sandwich ELISA: To detect hBCA-1 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BCA-1 (500-P141) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBCA-1.

Biotinylated Anti-Human BCA-1 (CXCL13) Sandwich ELISA

Western Blot: To detect hBCA-1 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBCA-1 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BCA-1 (CXCL13) Western Blot Unreduced Biotinylated Anti-Human BCA-1 (CXCL13) Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BD-1

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBD-1. Anti-Human BD-1 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BD-1 (47 a.a.) (PeproTech catalog# 300-51A)

Sandwich ELISA: To detect hBD-1 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BD-1 (500-P253) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBD-1.

Biotinylated Anti-Human BD-1 Sandwich ELISA

Western Blot: To detect hBD-1 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBD-1 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BD-1 Western Blot Unreduced Biotinylated Anti-Human BD-1 Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BD-2

Source: Polyclonal Goat

Preparation: Produced from sera of goats pre-immunized with highly pure (>98%) recombinant hBD-2. Anti-Human BD-2 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BD-2 (PeproTech catalog# 300-49)

Sandwich ELISA: To detect hBD-2 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BD-2 (500-P161G) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBD-2.

Biotinylated Anti-Human BD-2 Sandwich ELISA

Western Blot: To detect hBD-2 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBD-2 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BD-2 Western Blot Unreduced Biotinylated Anti-Human BD-2 Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BD-3

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBD-3. Anti-Human BD-3 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BD-3 (PeproTech catalog# 300-52)

Sandwich ELISA: To detect hBD-3 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BD-3 (500-P241) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBD-3.

Biotinylated Anti-Human BD-3 Sandwich ELISA

Western Blot: To detect hBD-3 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBD-3 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BD-4

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBD-4 (Human Beta Defensin-4). Anti-hBD-4 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BD-4 (PeproTech catalog# 300-65)

Sandwich ELISA: To detect hBD-4 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BD-4 (500-P268) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBD-4.

Biotinylated Anti-Human BD-4 Sandwich ELISA

Western Blot: To detect hBD-4 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 μg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBD-4 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BD-4 Western Blot Unreduced Biotinylated Anti-Human BD-4 Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BD-5

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBD-5. Anti-Human BD-5 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BD-5 (PeproTech catalog# 300-68)

Sandwich ELISA: To detect hBD-5 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BD-5 (500-P323) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBD-5.

Biotinylated Anti-Human BD-5 Sandwich ELISA

Western Blot: To detect hBD-5 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBD-5 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BD-5 Western Blot Unreduced Biotinylated Anti-Human BD-5 Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human/Murine/Rat BDNF

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBDNF. Anti-Human BDNF specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human/Murine/Rat BDNF (PeproTech catalog# 450-02)

Sandwich ELISA: To detect hBDNF by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BDNF (500-P84) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBDNF.

Biotinylated Anti-Human/Murine/Rat BDNF Sandwich ELISA

Western Blot: To detect hBDNF by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBDNF is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human/Murine/Rat BDNF Western Blot Unreduced Biotinylated Anti-Human/Murine/Rat BDNF Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human Betacellulin

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBetacellulin. Anti-Human Betacellulin specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human Betacellulin (PeproTech catalog# 100-50)

Sandwich ELISA: To detect hBetacellulin by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human Betacellulin (500-P254) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBetacellulin.

Biotinylated Anti-Human Betacellulin Sandwich ELISA

Western Blot: To detect hBetacellulin by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 μg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBetacellulin is 1.5 – 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human Betacellulin Western Blot Unreduced Biotinylated Anti-Human Betacellulin Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human/Murine/Rat BMP-2

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBMP-2. Anti-Human BMP-2 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human/Murine/Rat BMP-2 (PeproTech catalog# 120-02)

Sandwich ELISA: To detect hBMP-2 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BMP-2 (500-P195) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBMP-2.

Biotinylated Anti-Human/Murine/Rat BMP-2 Sandwich ELISA

Western Blot: To detect hBMP-2 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 mg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBMP-2 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human/Murine/Rat BMP-2 Western Blot Unreduced Biotinylated Anti-Human/Murine/Rat BMP-2 Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BMP-7

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBMP-7. Anti-Human BMP-7 specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: CHO cells derived Recombinant Human BMP-7 (PeproTech catalog# 120-03)

Sandwich ELISA: To detect hBMP-7 by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BMP-7 (500-P198) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBMP-7.

Biotinylated Anti-Human BMP-7 Sandwich ELISA

Western Blot: To detect hBMP-7 by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBMP-7 is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BMP-7 Western Blot Unreduced Biotinylated Anti-Human BMP-7 Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

Size
195.00 USD 25µg
250.00 USD 50µg
3,400.00 USD 1mg
Looking for a custom size?
Contact Us

Biotinylated Anti-Human BRAK (CXCL14)

Source: Polyclonal Rabbit

Preparation: Produced from sera of rabbits pre-immunized with highly pure (>98%) recombinant hBRAK. Anti-Human BRAK specific antibody was purified by affinity chromatography and then biotinylated.

Immunogen: E.coli derived Recombinant Human BRAK (CXCL14) (PeproTech catalog# 300-50)

Sandwich ELISA: To detect hBRAK by sandwich ELISA (using 100 μl/well antibody solution) a concentration of 0.25 – 1.0 μg/ml of this antibody is required. This biotinylated polyclonal antibody, in conjunction with PeproTech’s Polyclonal Anti-Human BRAK (500-P237) as a capture antibody, allows the detection of at least 0.2 – 0.4 ng/well of recombinant hBRAK.

Biotinylated Anti-Human BRAK (CXCL14) Sandwich ELISA

Western Blot: To detect hBRAK by Western Blot analysis this antibody can be used at a concentration of 0.1 - 0.2 µg/ml. Used in conjunction with compatible secondary reagents the detection limit for recombinant hBRAK is 1.5 - 3.0 ng/lane, under either reducing or non-reducing conditions.

Biotinylated Anti-Human BRAK (CXCL14) Western Blot Unreduced Biotinylated Anti-Human BRAK (CXCL14) Western Blot Reduced

Note:

1mg will be provided as 2x500μg.

showing 20 of 285